Panther 1650, Инструкция/Каталог запасных частей

Страница: 47 / 103

P
ANTHER
MODEL PAGE NO.
1350/1650 36
3.5 Apron
Apron Mechanism is drop worm type mechanism. Feed engage
and disengage is done just by operating feed engage lever (33). For
engaging feed, lift lever (33) in upward direction and for dis- engaging
feed push lever (33) in downward direction.
Feed selecting knob (32) has 3 positions longitudinal newtral and
transverse. To get transverse feed pull knob (32) out side. To get
longitudinal feed push knob (32) in side and centre position is newtral
position. Hand wheel (31) is provided to move carriage on bed by
manual operation. While moving carriage on bed manually, keep feed
selective knob (32) in newtral position.
Half nut engaging lever (34) is used during threading operation.
Half nut engaging lever (34) and feed engage lever (33) both are
interlocked with each other to avoid accident. If you engage lever (34)
for threading operation than lever (33) for feed engagement will be
locked and viceversa.
3.6 Carriage
Carriage (36) are provided with flat surface for clamping area for
odd job and fixture.
Surface slide (37) is moves in transverse direction man only by
hand wheel (38). Surface slide is guided in carriage in 2 dowetails.
Back lash adjustment arrangement is provided in gun metal surface
screw nut. You can unlock lock nut and rotate split hex nut of main nut
to adjust axial backlash and than retight lock-nut.
Spigot located compound slide (39) is provided on top face of
surface slide (37). You can set compound slide at any desire angle. For
setting compound slide at angle unlock two hex nuts provided on
compound slide base and set compound slide at desire angle than clamp
these two hex nuts.