Panther 1650, Инструкция/Каталог запасных частей

Страница: 33 / 103

2.5 Electric connections.
Machine may be supplied with any one option listed below.
(1)
Simple Reverse forward switch.
(2) 16 spindle speeds by using two speeds elect. Motor with speed
selector switch and Reverse / Forward switch.
(3) Foot pedal with Reverse / Forward starting shaft having 8 or 16
spindle speed.
(4) Foot brake with Reverse / Forward starting shaft having 8 or 16
spindle speeds.
2.5.1 Simple Reverse Forward switch.
Refer wiring diagram On Page no. 19A
One fuse box is provided on backside of cabinet / headstock leg.
Open this fuse box and connect 3-phase power supply with fuse
terminal and copper earthling with machine body.
After completing this connection, please check rotation of main
spindle in forward and reverse direction. If the direction of spindle
speed is not matched with Reverse / Forward switch position than inter
change any of the two phase of elect. Wire at the main supply. During
wiring proper earthling should be made to avoid any accident.
2.5.2 16-spindle speed by using two speeds elect. Motor with
speed selector switch and Reverse – Forward switch.
Refer wiring diagram On Page no.19C
In this option one electrical box is provided in place of Reverse
Forward switch. In this electrical box one speed selector switch is
provided which allows to select motor speed range high or low and one
reverse/forward switch is also provided to select spindle rotation in
Reverse or Forward direction. For detail wiring refer wiring diagram
given on page no.19C
P
ANTHER
MODEL PAGE NO.
1350 / 1650 20