Panther 1650, Инструкция/Каталог запасных частей

Страница: 34 / 103

2.5.3 Foot pedal with Reverse / Forward starting shaft having
8/16 spindle speed.
Refer wiring diagram On page no.19F
In this option one electrical panel is provided in head stock leg in
case of leg type machine or on backside of cabinet in case of cabinet
type machine. In leg type machine this control panel is kept inside of
head stock leg and one hinge door is given to protect this control panel.
On on/off rotary switch is given on control panel door which
provides interlocking for safety, when power supply is on this door
cannot be open but to open the door you have to switch off power
supply.
For detail wiring refer wiring diagram given on page no.19F
2.5.4 Foot brake with Reverse / Forward starting shaft having
8/16 spindle speed.
Refer wiring diagram On page no.19I
In this option wiring is as per detail given in 2.5.3. The only
difference is one electro magnetic brake; operated on 24 V.DC power
supply is provided with head stock pulley. Due to this electro magnetic
brake machine spindle stops instantly when power supply cut off.
For detail wiring refer wiring diagram given on page no.19I
2.6 Lubrication
Proper lubrication of Lathe machine plays vital rolls to retain
accuracy and gives satisfactory performance. If the lubrication is
neglected the bearing surface may be damage. Impairing the accuracy
and shortening the life of the machine.
P
ANTHER
MODEL PAGE NO.
1350 / 1650 21