6
Getting Started
With your New Pantel TV
1.
Input and Output Interfaces
2.
Side Button Controls
Vol Down, Vol Up, Chan Down, Chan Up, Source, Menu, Power
3.
Connecting the TV if Hardwired
- NOTE: The Pantel TV may take up to 20 seconds to start up.
- There are various ways of setting up the Pantel Outdoor weatherproof TV. Make sure that
the TV power is turned off when connecting any cables.
Tuner (Coaxial Cable)
- Connect the coaxial RF cable from your cable box or antenna to the Tuner port in the back
of the TV.
- Turn on the TV.
- Select the Tuner source using either the remote control or the side button controls.
- Using the on-screen display, perform a channel scan.
- NOTE: Using this input source, the TV will receive any standard- or high-definition, over-
the-air channels.
- This input accepts the following formats: NTSC, ATSC-VSB, QAM64 and QAM256.
- A 3D-COMB filter is applied when the TV is detected in NTSC mode.
