22
Wireless Setup
The following lists a step-by-step set-up procedure
Step 1: Connect the power cord
- Connect power cord to AC adapter
- Attach AC adapter to DC IN jack on rear of wireless transmitter unit
Step 2: Connect video sources
- Connect your video device (DVD, VAR, PVR, STB, or BS) using the supplied S-Video or
composite (yellow, red, & white) cable
Step 3: Video Input
- Connect composite cable to video input jack and/or connect S-Video cable to S-Video IN
jack on the rear of the wireless transmitter unit.
- NOTE: If a source is available via both inputs, S-Video will be the default and will be
displayed due to its inherent higher quality.
Step 4: Power on
- Press the power button on the rear of the wireless to turn the power ON
Step 5: IR Function (If you require use of a remote control)
- Connect the included IR cable/repeater at the back of the wireless transmitter unit.
- Place the LED head module of the cable/repeater in front of the usual IR receiver point
of the input source (DVD player, cable box, etc.)
- Use your DVD (or other video source) remote control by pointing it at the IR receiver
window located at the front panel of the Pantel TV.
4. Main Specifications
- IEEE802.11a (5.2GHz)
- MPEG2 Encoder and Decoder built-in
- Adaptive transmission (24Mbps, 12Mbps, 6Mbps)
- Adaptive video rate (14Mbps, 8Mbps, 4Mbps)
- Automatic error recovery
- Small constant latency (less than 0.4-0.6s)
- AES content protection
