Panta Rhei hydro wizard ECM75, Руководство пользователя, Страница: 32 / 40

32
Troubleshooting
Problem Possible Cause Solution
pump will not start no power
plug the pump in
check house/GFI fuse
speed display says „zero“
read the manual section for
the controller
the impeller is blocked
unplug the pump, remove
the blockage
motor is not plugged
plug the motor into the
controller
after a power failure all
settings are set back to
zero
value must be reentered in
the controller
pump suddenly stops the impeller is blocked
unplug the pump, remove
blockage
power failure check GFI/ house fuse
the controller is in a
change settings mode
read the manual for the
controller
the pump is no longer
generating a flow
the intake basket is
clogged
clean the intake basket
display Impeller failure
- hydro wizard® don’t turn
- Impeller defect
- put hydro wizard® under
water
- change impeller
loud noise
a wing of the impeller has
broken off
unplug the pump an replace
the impeller
reason not apparent contact the manufacturer
For any other problems please get in contact with Panta
Rhei Service. Repairs can be made only by Panta Rhei or
authorized dealers.
Disposal and Enviroment
The pump should not be discarded with the
regular trash, it should be disposed of
according to local regulations, please check
with your local authority.
[RICHTLINIE 2002/96/EG]