Panta Rhei hydro wizard ECM75, Руководство пользователя, Страница: 11 / 40

11
-
The cable may not be wound in operating mode
-
The hydro wizard generates very high axial forces. In addition to
this, the inertia of the moving water will generate further forces
acting on the mount. If you decide to build your own mount
make sure that the attachment of the pump can handle forces of
150N.
-
The pump must be fully submerged in water. It must be installed
deep enough to ensure it will not draw air from the surface.
Remember that in Wave mode the water level will change.
-
The pump can be installed directly above the bottom. With a fine
substrate the pump can draw in sand. To avoid this, increase
the distance from the pump to the bottom.
Particles sucked in
and pushed out the front can cause damage.
- Make sure plants or other objects do not cover the intake basket
when they get sucked onto it.
-
Protect the cable from animals that could damage it.