Panta Rhei Hydro Wizard ECM 63, Руководство пользователя, Страница: 23 / 36

23
There are four options for the BUS connection:
„
Aus “, „ Sync “, „ Slave “ und „ Master “
When connecting several power supplies, one must act as the
Master.
gewählt werden. The controller of this unit will control the others
(depending on their option setting).
If a controller/power supply is configured as
Master , a small crown will
be in the time display.
Figure 12: Master symbol in the time display
If a unit is set to
Slave , it will take the settings of the Master
automatically. The information screen will display "Slave" and the
settings transmitted by the Master. If the connection is interrupted the
unit will continue to operate in this mode.
If a unit is set to
Sync , it will copy the exact time and start/stop wave
settings of the Master, but will otherwise function independently.
Complex settings of the wave or Profile mode can be reproduced with
this setting (i.e. wave phases, of time dependent currents). If a unit is
set to Sync and connected to a Master the time display will show an
"S".
Figure 13: Sync symbol in time display