Panta Rhei Hydro Wizard ECM 63, Руководство пользователя, Страница: 10 / 36

10
- Outer magnets
For the installation of the
magnets on the outside we
suggest to place the magnet
against the glass far away
from the pump (1) and then
slide it over to the final
position (2).
Directly placing the magnet in the final position can damage
the glass, or injure your fingers!
- The exterior magnets are not designed for use in the aquarium.
Water can seep into the magnet and lead to corrosion.
- The pump must be fully submerged in water. The pump must be
installed deep enough to ensure it will not draw air from the
surface. Remember that in wave mode the water level will
change.
-
The pump can be installed directly above the bottom. With a fine
substrate the pump can draw in sand. To avoid this increase the
distance from the pump to the bottom.
Particles sucked in
and pushed out the front can cause damage.
- Make sure plants or other objects do not cover the intake basket
when they get sucked onto it.
-
Protect the cable from animals that could damage it.
- Connect the plug of the motor (right) and the power supply (left)
with the controller.