Instruction Manual ECO LIFT
Page 20 of 32
Version 2.03
5.
Subsequently, the desired maximum temperature (indicated by the green lettering
on the display) can be selected by means of navigation using the arrow keys on the
display.
6.
Finally, the current menu is exited by pressing the "R" key on the right of the display.
In order to ensure that the changes made are also correctly implemented, switch off
the entire heating unit. When the system is then turned on again, the new
temperature unit and maximum temperature should already have been considered
and accepted by the heating unit.
Usage of tie-down cleat (accessory part)
In case any tie-down cleats or similar accessories have been included in the scope of
delivery, these may normally be attached to the rails that are connected with the side of the
product.
Prior to use, the accessory has to be loosened at the respective locking screw and threaded
laterally onto the siderail. Once the desired position of the tie-down cleat on the rail has
been attained, it must be tightened at the locking screw to stabilize it in place.
4
5
6
Press 3x
Select with
arrow keys
Exit the menu
Tighten
Loosening
