SCANNDY USER GUIDE
Page 9
GETTING STARTED
Connecting the cradle unit to the host computer system
1. Power OFF your Computer system
2. Plug the power supply connector into the power jack of the cradle
3. Plug the interface cable into the connector of the cradle
4. Connect the interface cable to the corresponding interface on your computer system
5. Plug the power supply to your wall plug socket to power ON the cradle unit. You will hear a
beep melody and the power indicator LED will indicate green light
6. Power ON your computer system
The cradle unit is now ready to operate.
Before start working with the SCANNDY unit please charge the battery for at least 8 hours to make
sure the battery is fully charged to provide it’s best performance.
COMPUTER
System
DC 6V 1.5A
Power supply
RS232, KBW or Ethernet
cable
Gun Type
cradle unit
Basic Type
cradle unit
DC 6V 1.5A Power supply
RS232, KBW or Ethernet cable
COMPUTER System
