SCANNDY USER GUIDE
Page 35
PACK CONTROL
On some applications it is necessary to generate packages with the data to be transmitted.
Setup the Pack control options according to your application.
Enable Packing
Set this option to True to have the Cradle waiting for a special amount of characters before
sending the message to the host
Idle Gab Time
Set the time the unit should wait before sending the data. All characters received
within this time, will be paced to one data string
Match Two Byte Sequence
If this sequence is enabled, the unit interprets the send characters as a 2-byte sequence; if
this option is not enabled, the unit interprets them independently.
Send Trailing Bytes
In some applications, CRC, Checksum or other trailing characters, follow the end-of-
sequence character, this option helps to adapt frame transmissions to the frame boundary.
