SCANNDY USER GUIDE
Page 34
SERIAL PORT SETTINGS
To view the serial settings and modify the options for Pack control and Flush mode, please click the
link “Serial Setting”
Inside the SCANNDY Cradle only Port 1 is used to communicate with the SCANNDY device.
As factory default the serial settings for Channel 1 are set to:
Baud Rate......... 9600
Databits ............ 8
Parity ................ None
Stopbit .............. 1
Flow control ..... None
Only change this settings if the serial settings on the SCANNDY device are different or if you want to
update Firmware on a Scanndy device using the cradle.
