INSTRUCTIONS CM396F
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
Fax
:
(708)444-6448
www.panduit.com
Page 4 of 4
Long POU’s
Part Numbers: CMRPSVD20TL, CMRPSVD20, RPSV243520TL5,
RPSV243620TL6
Affix Power Strip Mounting mounting brackets using #12-24 screws
provided into tapped holes in the front or the sides of the post. Power
Strip Mounting Brackets can also be mounted to the rear equipment
rails. To center the 66.25” vertical power strips mount L-Bracket at
RU spaces 03 and 43 for 7ft. 4 post racks. For 8ft. 4 post racks,
mount L-Bracket at RU spaces 06 and 46 or spaces 07 and 47. For
6.5ft. 4 post rack, flip bottom bracket 180
o
and mount L-bracket at
RU spaces 02 and 40. Mount power strip between brackets.
Power Strip
Front of post installation
Secure POU to brackets
Side of post installation
Short POU’s
Part Numbers: CMRPSV20, CMRPSV20TL
Secure brackets using
#12-24 Screws
Secure brackets using
#12-24 Screws
Note:
Short POU’s may be orientated using one of
two post hole configurations, side or front of post
Configuration
2
Configuration
1
Secure POU
to brackets
Side of post
installation
CVPDUB-
Pair of Brackets for Vertical POU Button Mounting to the
side of the rack post.
CVPDUB
Align bracket to desired location on rack post,
then secure with #12-24 screws.
#12-24 Screws
#12-24 Screw
Fasten bridge lance on bracket to desired C-
shaped cutout on post (both brackets), then
secure with #12-24 screw.
CNSPE-
Pair of end slack spools including spools and mounting
brackets.
CNSPE
C-shaped cutout on post
Bridge lance on
bracket
Front of post
installation
Flip bottom bracket 180
o
for 6.5ft. rack
