Panduit NREPB1 Installation Instructions Download

Page: 1 / 2

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

INSTRUCTIONS CM406D

Page 1 of 2

ETRUNNER

End Panels

Part Numbers:

WMPV45EPB1, NREPB1

WMPV45EPB1

(2) End Panels
(4).375-16 Acorn nuts
(4).375 -16 Bolts

Assembly:

Step 1:

Insert bolt into mounting
location one.

Step2:

Place End Panel over the
bolt and hand tighten nut.

Step 3:

Insert bolt into location two
a secure with acorn nut.
Tighten acorn nut in loca-
tion one.

Mounting Locations

Geometry modified for clarification: Not
all molded fingers are shown

Step 4:

Repeat steps 1-3 for upper
End Panel

End Panel
WMPV45EPB1

(Shown)

Note:

Install lower end panel first when

using a stacked configuration.

WMPV45EPB1 Installation Instructions

Mounting Location 1

Mounting Location 2

Mounting Location 1

Mounting Location 2

Summary of Contents for NREPB1

Page 1: ...lace End Panel over the bolt and hand tighten nut Step 3 Insert bolt into location two a secure with acorn nut Tighten acorn nut in loca tion one Mounting Locations Geometry modified for clarification...

Page 2: ...side of rack 3 8 16 Bolts 3 8 16 Bolt 3 8 16 Nuts tighten by hand 1 4 20 Bolts and Washers 1 4 20 Nuts Bracket may be anchored to floor using these slots Hardware not included Bracket may be orientat...

Brands by name