© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01
Page: 18 of 46
4-2018
4.2 Detailed Setup Instructions
4.2.1 Remove Top Clamp
Loosen thumbscrews at both ends of top clamp and slide clamp off loader.
4.2.2 Remove Top Weights
a. Lift the top weight out of the loader.
b. For 1.72” (43mm) wide plates the weight is not accessible. Remove the weight
after moving the RH side wall in Step 4.2.4 [
Figure 5
]. Note that 1.72” x 0.75”
(43mm x 19mm) will have 2 identical weights.
4.2.3 Remove Plates
a. Remove any plates remaining in the loader and place in original packaging to
prevent damage.
(For 1.72” (43mm) wide plates, complete Step 4.2.4 first)
4.2.4 Move RH Side Wall
a. Loosen RH Side Knob [
Figure 1
] and move right hand side wall out of the way
[
Figure 5
] by pushing on the bottom of the wall assembly.
Figure 1
3.5” (89mm) Plate width
