Panduit PES400 Скачать руководство пользователя

Страница: 6 / 48

OPERATION MANUAL

PES400
ENGLISH

PES400: PA28981A01_01

Page: 4 of 46

4-2018

•

The Identification Label attached to the rear panel contains information about the

serial number, the type of machine, the necessary power supply and maximum
current.

•

Before switching the machine on, be sure that all the cables have been connected

correctly and that the local power supply corresponds to that stated on the label.

•

The label layout is as follows:

Model: PES400

Type: Embossing Machine

Volt: 100 – 240 VAC

Hz: 50/60

Imax: 5.6 A

S/N: Serial Number

Mfg.: Manufacture Date

Fuse rating: 2x – T5A 250VAC

1.4 Install Software for the USB to Serial Adapter

1.4.1 System Requirements

•

Windows 10, Windows 8, Windows 7, Vista, Windows 2000 SP4 or Windows
XP SP2.

•

USB to Serial DB9 adapter

•

Computer with available USB ports

1.4.2 Install Software for the USB to Serial Adapter (XP, Vista, 2000)

Insert the Flash Drive that came with the PES400 into the USB port on the
target computer.

If the auto start runs the installation go to Step 6, if not continue.

Click on the My Computer icon, either on the desktop or click Start and then
My Computer.

Double-click on the icon for the Flash Drive to display the files.

Find the Autorun.exe or Setup.exe file and double-click on it.

Select the option to install the USB to Serial Adapter you have with the
Windows version you are running.

Connect the USB to serial cable to serial cable from embosser and USB port
on computer. Reboot if prompted to reboot.

Содержание PES400

















































Результаты поиска

Содержание PES400

Отзывы:

Похожие инструкции для PES400

Бренды по названию

Популярные бренды

Panduit PES400, Руководство по эксплуатации

Результаты поиска

Содержание PES400

Отзывы:

Похожие инструкции для PES400

Бренды по названию

Популярные бренды