© Panduit Corp. 2018
OPERATION MANUAL
CT-930LPCH &
CT-940CH/BJO
CT-930LPCH_CT-940CH/BJO: PA29199A01_00
Page: 2 of 9
6-2018
CT-900HPH or CT-900LPHPH:
Electrically non-conductive 10 ft. hose. Supplied pre-filled
with hydraulic fluid for fast start up.
Hydraulic Pump System –
for the CT-940CH/BJO:
CT-902HP Hydraulic Pump System is factory preset at
10,000-PSI ± 200 PSI (700 bar). Pump shuts off when
cycle is complete. Will not release until the down switch is
activated.
Hydraulic Pump System –
for the CT-930LPCH:
CT-902HP-5K Hydraulic Pump System is factory preset at
5,000-PSI ± 200 PSI (350 bar). Pump shuts off when cycle
is complete. Will not release until the down switch is
activated.
CT-902RCH Remote Control Handle
To ease operation of the Hydraulic Tool System
Dimensions:
155 L x 167 H x 34 W (mm)
6.1 L x 6.6 H x 1.4 W in.
Weight:
3.0 (kg) / 6.6 lbs.
CT-902RFS Remote Foot Switch
Remote Foot Switch allows for hands free operation
Dimensions:
243 L x 173 H x 180 W (mm)
9.6 L x 6.8 H x 7.1 W in.
Weight:
3.5 (kg) / 7.7 lbs.
CT-940CHHAN
Handle can be mounted to crimp head for ease in movement
when performing multiple crimps.
PG-1
Verifies the PSI reading of the CT-902HP Hydraulic Pump
and CT-902HP-5K Low Pressure Hydraulic Pump.
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as a
guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or assume
any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific dimensional
requirements consult the factory. This publication is not to be taken as a license to operate under, or a recommendation to infringe
any existing patents. This supersedes and voids all previous literature, etc.
