© Panduit Corp. 2018
OPERATION MANUAL
CT-930LPCH &
CT-940CH/BJO
CT-930LPCH_CT-940CH/BJO: PA29199A01_00
Page: 4 of 9
6-2018
WARNING
Do not use solvents or flammable liquids to clean this tool. Solvents or flammable liquids could
ignite and cause serious injury or property damage.
Do not use tool in or near a highly flammable or explosive atmosphere and/or materials.
CAUTION:
Ear protection should be worn when operating the tool.
CAUTION – When using CT-930LPCH or CT-940CH/BJO Crimp Heads
DO NOT OPERATE WITHOUT DIES
WARNING
•
An incomplete crimp can cause a fire.
•
Use proper compression connector and cable combinations. Improper combinations can result in an
incomplete crimp.
•
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief
valve, the crimp is not complete.
•
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or
nearby personnel.
•
Do not lift crimp head by pulling hydraulic hose assembly. If tool is to be moved frequently, the
CT-940CHHAN Tool Handle assembly (sold separately) should be used to avoid damage to
hydraulic hose assembly.
CAUTION
•
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
•
Do not place the tool in a vise. The tool is designed for hand-held operation.
•
Protect the tool from rain and moisture.
•
Use this tool for the manufacturer’s intended purpose only.
