AT-OME-MS52W
73
Device Operation
Active Video Presence with Occupancy Sensor
This method is similar to the
Active Video Presence
mode, except that an occupancy sensor can also be used to
provide hybrid operation. If using this mode, an occupancy sensor should be connected to the
TRIGGER I/O
port
on the AT-OME-MS52W. Refer to
for wiring information.
1.
Login to the web server. Refer to
Logging in to the Web Server (page 22)
for more information.
2. Click
Display
in the side menu bar.
3. Under the
Control
window group, make sure that the
AutoSwitch
checkbox is checked. This feature must be
enabled.
4. Click the
Display Control Method
drop-down list and select
Active Video Presence w/Occupancy Sensor
.
5. The
Trigger I/O
window group will be displayed, along with two checkboxes:
Enable Trigger On
and
Enable
Trigger Off
.
Check the
Enable Trigger On
checkbox to enable a
power-on
state when the trigger voltage is pulled from low
to high. Check the
Enable Trigger Off
checkbox to enable a
power-off
state when the trigger voltage is pulled
from low to high. Either or both checkboxes can be enabled. When enabled, all other display power options are
overridden.
6.
Setup is complete.