Panduit Atlona AT-UHD-SW-510W Скачать руководство пользователя страница 83

Страница: 83 / 116

AT-UHD-SW-510W

The Web GUI

Setting

Description

RS-232

Audio is controlled using RS-232

IP*

Audio volume/muting is controlled using IP

Audio Out

Audio is controlled using the web GUI or front panel buttons

Setting

Description

RS-232

RS-232 is used to send commands.

Commands are sent over IP.

CEC

Uses CEC to send commands.

NOTE:

Control Type

is set to

CEC

, then the

Volume / Mute

drop-down list will be disabled.

Refer to the

CEC (page 46)

section for more information.

Once the countdown timer expires, the display will power off. Refer to the illustration below.

Control Type

Sets the control protocol for the connected display. Click this drop-down to select the control type. Available
settings are

CEC

, and

RS-232

. By default, CEC is selected for control of the display. IP and RS-232 can also be

selected. When IP or RS-232 are selected, more fields are available.

Volume / Mute

This option is only available when

Control Type

is set to

RS-232

* Only available when

Control Type

is set to

Click these button to test CEC functionality over HDMI and HDBaseT. Click the

button to send the power-on

command to the display device. Click the

Off

button to send the power-off command to the display device.

These buttons will only be enabled if a device is connected to the AT-UHD-SW-510W, using the correct cable.
For example, the HDMI ON / OFF buttons will only be enabled when an HDMI cable is connected from the AT-UHD-
SW-510W to a display.

CEC Commands

Consumer Electronics Control (

CEC): Atlona has confirmed proper CEC functionality with several current models of

Samsung, Panasonic, and Sony displays. However, it is not guaranteed that CEC will work with all displays. Many

manufacturers do not support the CEC “off” command, and older displays use proprietary commands. Atlona only

supports displays that use the CEC command structure defined in HDMI 1.2a. It is recommended that dealers re

quest an evaluation product from Atlona, before designing a system using the CEC protocol. If this is not possible,

then other control methods will need to be considered, in order to control displays using Atlona products.

Relay

Enable Momentary Relay

When enabled, the

RELAY

port can be used to control screens, curtains, and other devices. Use a 48 V DC relay

with no more than 1 A current draw. This feature is enabled, by default. Refer to

Relay (page 13)

for wiring

information.

Relay Pulse Duration

Click this drop-down list to select the desired pulse duration for the relay. Some devices may require different time

intervals, to recognize a state change. Range: 1 to 10 seconds.

Содержание Atlona AT-UHD-SW-510W





















































































































Результаты поиска

Содержание Atlona AT-UHD-SW-510W

Отзывы:

Бренды по названию

Популярные бренды

Panduit Atlona AT-UHD-SW-510W, Руководство пользователя

Результаты поиска

Содержание Atlona AT-UHD-SW-510W

Отзывы:

Бренды по названию

Популярные бренды