AT-UHD-SW-510W
61
Using Ethernet
Advanced Operation
1. Login to the web GUI. Refer to
Introduction to the Web GUI (page 71)
for more information.
2. Click
Administration
>
Networking
from the menu bar on the left.
3. Under the
Ethernet
tab. Make sure the proper network mode is set:
DHCP
,
Static IP
, or
Factory Static
.
Refer to
for more information.
4. Click the
802.1x Enable
checkbox.
5. Enter the required credentials in the
Identity
and
Password
fields.
6. Click the
Upload
button to upload the required certificate to the AT-UHD-SW-510W. Note that the PKCS#12 file
(.pfx file) should not include a private key. To delete an existing certificate, click the
Delete
button.
7. Click
Save
to commit all changes or click
Cancel
to abort changes.
