AT-UHD-SW-510W
58
Advanced Operation
Scheduling Display Operation Times
The AT-UHD-SW-510W can be configured to automatically power-on or power-off a display during specified times
and days of the week. Note that discrete calendar dates cannot be specified.
1. Login to the web GUI. Refer to
Introduction to the Web GUI (page 71)
for more information.
2. Click
Display
from the menu bar on the left.
3. Click the
Display Auto Power
check box.
4. Click the
Enable Time Display Control
check box.
5. Click drop-down lists, next to
Start Time
, to set the hour and minute when the display will be powered-on.
Time is specified in 24-hour format.
6. Click the
End Time
drop-down lists, for both hour and minute, to specify the display power-off time. Time is
specified in 24-hour format.
7. Click the
Timezone
drop-down list to set the proper time zone.
8.
Click the desired checkbox(s) to specify which day(s) that the unit will power-on and power-off the connected
display.
Display Auto Power
Enable Time Display Control
