5. Operation
•
With the power source in the “OFF” position, connect the hoses. Do not drag the service hose by pulling
with the tool. Loop the service hose in the work area in such a way to relieve stress on the hose and quick
disconnect fittings while working. Be aware of hose location at all times.
•
Connect the tool to the power source.
•
Turn the power source “ON” to supply 10 GPM to tool.
•
To tighten bolts, push the lever handle (located on both sides of impact wrench manifold) forward. To loosen
bolt, pull lever handle back.
•
Pull the trigger up to start the wrench.
•
Never operate the tool on any higher flow than 10 GPM. The tool is designed to accept only the recommended
10 GPM and will malfunction and overheat the oil if used otherwise.
•
Turn the power source “OFF” before disconnecting wrench.
8 av 24
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_IMPACT_WRENCH_P01 I 09th November 2021
@Pandrol 2021
