Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE
THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
3
Follow all workshop safety rules, regulations, and conditions when using wrench.
p
WARNING!
Disconnect from air supply before changing accessories or servicing.
3
Maintain the wrench in good condition and replace any damaged or worn parts.
Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING!
Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with an impact wrench.
3
Wear approved safety eye/face shield, ear defenders, and hand protection.
p
WARNING!
Due to the possible presence of asbestos dust from brake linings, when working
around vehicle brake systems we recommend you wear suitable respiratory protection.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and non essential persons away from the working area.
7
DO NOT use the wrench for a task it is not designed to perform.
p
p
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7
DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7
DO NOT direct air from the air hose at yourself or others.
3
When not in use disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR
3/4 SQUARE DRIVE
AIR IMPACT WRENCH
Model:
SA59.V2
01284 757500
E-mail: [email protected]
01284 703534
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment.
WARRANTY:
Guarantee is 12
months from purchase date. proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and
promotions, call us on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group
, Bury St. Edmunds, Suffolk.
2.
INTRODUCTION & SPECIFICATIONS
Drive size . . . . . . . . . . . . . . . . . . . . . . . . . .3/4
Working/Max torque . . . . . . . . . . .900/1000ft/lb
Ultimate torque . . . . . . . . . . . . . . . . . . 1050ft/lb
Air consumption . . . . . . . . . . . . . . . . . . .18cfm
Operating pressure . . . . . . . . . . . . . . . . .90psi
Air inlet size . . . . . . . . . . . . . . . . . . . .1/4 BSP
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.5kg
Tough professional air impact gun fitted with a
smooth performing, power-pin type clutch.
Features an adjustable air/torque control and
reversible action plus spring balance anchorage
point. Fitted with standard 3/4 square drive anvil.
Suitable for general garage use.
Issue :
1
Date:
260602
Item
Part No
Description
Qty
1
SA59.V2.01 Motor Housing
1
2
SA59.V2.02 End Cap
1
3
SA59.V2.03 End Cap Gasket
1
4
SA59.V2.04 Screw
8
5
SA59.V2.05 Spring Washer
8
6
SA59.V2.06 Anvil Bushing
1
7
SA59.V2.07 Oil Seal
1
8
SA59.V2.08 Clutch Housing
1
9
SA59.V2.09 O-Ring
1
10
SA59.V2.10 Protecting Rubber
1
11
SA59.V2.11 Muffle Cover
1
14
SA59.V2.14 Oil Plug
1
15
SA59.V2.15 Trigger
1
16
SA59.V2.16 Screw
1
17
SA59.V2.17 Spring Pin
1
18
SA59.V2.18 Throttle Bushing
1
19
SA59.V2.19 Throttle Pin
1
20
SA59.V2.20 Steel Ball
1
21
SA59.V2.21 Spring
1
22
SA59.V2.22 Hose Fitting
1
23
SA59.V2.23 Dust Cover
1
24
SA59.V2.24 Valve Sleeve
1
25
SA59.V2.25 O-Ring
1
26
SA59.V2.26 Reverse Valve
1
27
SA59.V2.27 Air Regulator
1
28
SA59.V2.28 O-Ring
1
Item Part No
Description
Qty
29
SA59.V2.29 Spring Pin
1
30
SA59.V2.30 Pin
1
31
SA59.V2.31 Spring
1
32
SA59.V2.32 Screw
1
33
SA59.V2.33 Bearing
1
34
SA59.V2.34 Oil Seal
2
35
SA59.V2.35 Frong End Plate
1
36
SA59.V2.36 O-Ring
1
37
SA59.V2.37 Spring Pin
1
38
SA59.V2.38 Cylinder
1
39
SA59.V2.39 Rotor
1
40
SA59.V2.40 Rotor Blade
6
41
SA59.V2.41 Rear End Plate
1
42
SA59.V2.42 Bearing
1
43
SA59.V2.43 Spring Pin
1
45
SA59.V2.45 Hammer Cage
1
46
SA59.V2.46 Drive Cam Base
1
47
SA59.V2.47 Steel Ball
1
48
SA59.V2.48 Drive Cam
1
49
SA59.V2.49 Hammer Bar
2
50
SA59.V2.50 Spring
1
51
SA59.V2.51 Anvil
1
52
SA59.V2.52 Anvil Washer
1
53
SA59.V2.53 O-Ring
1
54
SA59.V2.54 Anvil Collar
1
SA59.V2 - 1 - 260602
Web Address: www.sealey.co.uk
