background image

41

40

USER MANUAL

PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM

INFORMATION

Siren sound and turn indicators signals

Signal

Description

Alarm, PANIC mode

Incessant sound and light signals for 30 sec

Arming

1 sound and 1 light signals

Disarming

2 sound and 2 light signals

‘Sensors triggered’ signal when 

disarming

4 sound and 4 light signals

‘Sensors malfunction’ signal 

when arming

4 sound and 4 light signals

Warning level of a sensor is 

triggered

3 sound signals

Car search

5 sound and 5 light signals

Beeper sound signals

Signal

Description

Enable the Service mode

1 sound signal

Disable the Service mode

2 sound signals

A battery in a radio tag is 

discharged

3 sound signals / 3 times

Absence of a radio tag

5 sound signals / 5 times

Blocking warning

Fast sound signals

Meaning of the LED indicator colors

Indicator status

Description

Short red flashes

System is armed

Fast red flashes

Alarm

Fast green flashes

System is armed (a radio tag is in the coverage zone)

Lit red

The system is preparing for automatic arming

Orange flash

Confirms VALET button press

Orange flashes (when 

switching on the ignition)

Confirms the number of recorded remote controls

Green flashes  (when switching 

on the ignition)

Confirms the number of recorded radio tags

Red flash

(when switching on the 

ignition)

Confirms the recorded mobile device

Red and green flashes

PIN-code is confirmed

Faded

The system is disarmed

Checking the number of recorded radio tags/mobile device 

The number of recorded remote controls/radio tags/mobile device can be 

checked by the number of green and red flashes of the LED indicator. The num-

ber of recorded remote controls/tags/mobile device can be checked when 

switching on the ignition (the system must be disarmed). The number of green 

flashes will indicate the number of recorded radio tags, a following red flash 

will indicate a mobile device is recorded.

You can also check the number of recorded tags and registered mobile de-

vice by taking off and putting back on battery terminal. The system will emit 

short sound signals from a siren with less than 1 sec. interval. The number of 

the signals equals to the number of recorded radio tags. After a pause of 2 

seconds the system signal will indicate registered mobile device.

Содержание Mini V4


























Отзывы: