23
22
USER MANUAL
PANDORA MINI V4 CAR SERVICE-SECURITY SYSTEM
• ENTER THE SECOND DIGIT •
Press the VA-
LET button the number of times, equals to
the second digit. Pauses between presses
should not exceed 1 second. Each pressing
will be confirmed with an orange LED indi-
cator flash. A pause for more than 1 second
and, red LED indicator flash and a short
sound signal of the beeper confirms the in-
put of the second digit. Then you can enter
the next digit.
• ENTER THE THIRD DIGIT •
Press the VALET
button the number of times, equals to the
third digit. Pauses between presses should
not exceed 1 second. Each pressing will be
confirmed with an orange LED indicator
flash. A pause for more than 1 second and,
red LED indicator flash and a short sound
signal of the beeper confirms the input of
the first digit. Then you can enter the next
digit.
• ENTER THE FOURTH DIGIT •
Enter the
fourth digit of the code using VALET button. Press the button the number of
times, equals to the fourth digit. Pauses between presses should not exceed
1 second. Each pressing will be confirmed with an orange LED indicator flash.
After entering the fourth digit:
• If the PIN-code is correct, the system will be disarmed. It will be confirmed
with the series of red and green flashes of the LED sound signals of the
Beeper, two signals of the siren and two flashes of the light signalization
• If the PIN-codе is incorrect the system will stay in the previous state. New
input can be attempted after 5 seconds. Incorrect PIN-code is indicated with
a long red flash of the LED.
• If the system was disarmed and the ignition was off, it will enter the pro-
gramming mode after correct entering the “Secret PIN-code”. Turn on the
ignition to exit the programming mode.
Emergency control of the anti-theft functions
This section describes how to deactivate and activate anti-theft functions
(Immobilizer and Anti-Hi-jack), which use a radio tag, a remote control or
a mobile phone as an owner authorization device, and “Code immobilizer”
function, which uses standard car controls (buttons, levers, pedals) to enter the
Immobilizer PIN-code.
Emergency deactivation of anti-theft function
To temporarily deactivate the Immobilizer or Code immobilizer function
(pin-to-drive), turn on the ignition when the system is disarmed. Enter the
“Secret code” from the Owner’s personal card using the VALET button. The
immobilizer functions will be deactivated by the time the ignition is turned off.
Emergency activation/deactivation Immobilizer/Code Immobilizer functions
Emergency control of the anti-theft functions is possible only when the
system is disarmed, the ignition is off, Service mode is deactivated, a vehicle
battery is charged.
Enter the “Secret PIN-code” or the “Service PIN-code” (default value is 1-1-1-
1) to put the system in programming mode.
Pauses between presses should not exceed 1 second. Each pressing will be
confirmed with an orange LED indicator flash. The system will confirm entering
the 13th level with the red flashes of the LED and short signals of the Siren/
Beeper.
• TO DEACTIVATE THE FUNCTION
– The LED indicator will be green after
entering the programming level. The system will wait 10 seconds for entering
the ‘Secret PIN-code’. If the PIN-code is not entered within 10 seconds or the
input is incorrect, the siren will sound one signal, the LED will produce the
series of red and green flashes and the system will return to the programming
menu. Enter the ‘Secret PIN-code’ that is written on the Owner’s personal card.
The system will confirm deactivating with two sound signals of the siren, a long
To manage Immobilizer and Anti-
Hi-Jack functions - After entering
programming mode, press the VALET
button 13 times.
To manage Immobilizer and Anti-
Hi-Jack functions - After entering
programming mode, press the VALET
button 15 times.
LED
VALET
2-2-2-2
PIN
