Pandora Mini Moto, Руководство пользователя и инструкция по установке

Страница: 8 / 23

15
14
U S E R A N D I N S TA L L AT I O N MA N UA L PA N D O R A M I N I M OTO
IMMOBILISER RADIO TAG
A radio tag is a device used to control a vehicle/system on a distance of a Bluetooth connection. The
tag is also used as an authorization device for «Immobiliser/Anti-Hi-Jack/Hands Free» modes. The
radio tag has: a control button for arming/disarming and activating/deactivating Service mode;
a built-in accelerometer, which allows the tag to go in the energy saving mode when there is no
movement; LED indicator SEND .
!
f
Or cOrrEcT OpEraTiON
,
iT is NOT rEcOmmENdEd
TO placE ThE radiO Tag NEar ThE mETal ObjEcTs
,
magNETic aNd ElEcTrONic dEvicEs
(
crEdiT cards
,
phONEs
,
kEys
,
rEmOTEs
,
ETc
.). d
O NOT ExpOsE ThE
radiO Tag wiTh high TEmpEraTurEs
,
mOisTurE
,
Or
sTrONg impacTs
. i
T is rEcOmmENdEd TO placE ThE
radiO Tag ON ThE bElT iN aN iNdividual casE Or iN
ThE frONT pOckET Of clOThiNg
.
Functions of the button
ACTION FUNCTION
- Short press when ignition is off Arm/disarm
- Press and hold for 3 sec
(ignition on)
Activating/deactivating Service mode
- Press and hold for 6 sec
(programming mode)
Pair a tag with the base unit
- Press and hold for 10 sec Firmware update
SEND
3D
LED indicator
Control button
Antenna 2.4GHz
(Bluetooth 4.2)
Built-in accelerometer
Battery
CR2032
Indication of the SEND LED
SIGNALS DESCRIPTION
one flash Arm/disarm
Confirmation of arming
Low battery level (when installing a battery)
two flashes Confirmation of disarming
three flashes High battery level (when installing a battery)
faded
constant light
Battery is discharged
(when installing a battery, when the button is pressed)
Installation/replacing a battery of the tag CR2032
To install or replace the battery (CR2032), carefully follow these steps:
1. Turn the battery cover in the «OPEN» direction;
2. Remove the battery cover;
3. Remove the battery from the battery compartment and, observing the polarity, install a new one
(when installing a high-quality battery, the SEND indicator light will produce three red flashes);
4. Install and rotate the battery cover in the «CLOSE» direction. After completing the procedure, you can
continue to operate the radio tag in normal mode.
Battery
СR 2032
(+) side
+
СR2032
1 4
3
2