17
16
U S E R A N D I N S TA L L AT I O N MA N UA L
PA N D O R A M I N I M OTO
Updating firmware of the tag
• Download the Pandora BT application (Android / iOS) or Pandora Specialist (Android) on the devices
equipped with a Bluetooth 4.0 Low Energy or higher module.
• Open the mobile app, find the system.
• Press and hold the button
of the radio tag until the 10th flash of the
«SEND»
indicator, then
release the button.
• Select the found device and select one of the update options: FILE MANAGER – firmware will be
uploaded from the phone storage (only for Android). INTERNET – firmware will be uploaded by an
internet connection.
MOBILE APPLICATION
Pandora Connect is a mobile application to control the system, receive status information and use
the mobile phone as an authorization device on a distance of a Bluetooth connection. The mobile
phone must be paired with the system.
The Pandora Connect mobile app is available for
downloading from the corresponding app store:
App Store for iOS devices;
Google Play for Android devices.
Read the procedure for writing a mobile device to the
system memory:
I. ENTER THE PROGRAMMING MODE
Use the VALET button to enter the «Service PIN-code» (default value is 1-1-1-1). See the detailed
instruction of code entering in the «Control over the system in case of emergency» section.
II. ENTER THE «PAIRING A MOBILE PHONE» PROGRAMMING LEVEL
After entering programming mode, press and hold the VALET button for 5 seconds (until the fifth
signal of the Siren). The system will enter the «Pairing a mobile phone» programming level. The LED
indicator will light green, the system is ready for pairing.
III. PAIR A MOBILE DEVICE
Enable the Bluetooth connection in the mobile device, enter the app settings, click «Bluetooth
control», click «Not defined». In the search box, establish a connection with the detected system. The
red and green flashes of the «LED» indicator light and a single siren sound will confirm the pairing.
IV. EXIT PROGRAMMING MODE
Turn on the ignition and then turn off to exit programming mode.
!
T
hE
maNufacTurEr
rEsErvEs
ThE
righT
TO
makE
chaNgEs
Of
ThE
iNTErfacE
aNd
fuNcTiONaliTy
Of
ThE
i
NTErNET
sErvicE
aNd
mObilE
applicaTiON
wiThOuT
NOTifyiNg
ThE
cONsumEr
.
!
T
hE
sysTEm
suppOrTs
b
luETOOTh
cONNEcTiON
ONly
wiTh
ONE
mObilE
dEvicE
.
a
fTEr
pairiNg
Of
a
NEw
dEvicE
ThE
prEviOusly
pairEd
will
bE
ErasEd
frOm
ThE
sysTEm
mEmOry
.
w
hEN
pairiNg
ThE
prEviOusly
pairEd
dEvicE
firsT
dElETE
ThE
ExisTiNg
b
luETOOTh
cONNEcTiON
iN
ThE
mObilE
phONE
,
ThEN
makE
a
pairiNg
ONcE
agaiN
.
i
f
ThErE
is
NO
auTOmaTic
pairiNg
,
ENablE
ThE
«piN
rEquEsT
fOr
phONE
pairiNg
»
iTEm
iN
ThE
«r
adiO
Tag
aNd
mObilE
dEvicE
fuNcTiONs
»
sETTiNgs
aNd
makE
ThE
pairiNg
prOcEdurE
agaiN
. a
mObilE
dEvicE
will
rEquEsT
a
piN-
cOdE
(f
acTOry
prE
-
sET
is
0-0-1-1-1-1
whErE
4
lasT
digiTs
arE
ThE
«s
ErvicE
piN-
cOdE
». T
his
sETTiNg
shOuld
bE
madE
by
a
qualifiEd
TEchNiciaN
.
