16
PANDORA DXL 1840L CAR SERVICE-SECURITY SYSTEM
Tow truck mode
This mode is intended for car transportation with preservation of arming function. Tow truck mode
can be activated only when the system is armed, it will be deactivated automatically when disarming.
All other system commands can be entered in the same manner.
Changing core settings via phone
To enter settings programming mode:
1.
Disarm the system
2.
Call the system number. Wait for answer.
3.
Switch ignition on for 1-3 seconds, then switch it off.
The system will enter settings programming mode.
WARNING!
THERE ARE ONLY TWO WAYS TO CHANGE THE OWNER’S PHONE NUMBER:
1. VIA A PHONE, USING CORE SETTINGS MENU.
2. VIA A COMPUTER AND PANDORA ALARMSTUDIO SOFTWARE
Example of changing the owner’s system number:
1. Enter the setting menu via a phone according to the instruction above;
2. Dial DTMF command 1*(phone number settings) and 1*(owner’s system number);
3. Enter new owner’s number in the format *XXXXXXXXXXX # (the system recognizes ‘*’ as ‘+’);
To confirm, dial 1*
System’s number -> «#»
5
5
*
*
Set up date
Set up time
1
1
*
*
2
2
*
*
Phone
number settings
Owner's number -> #
Additional owner's number -> #
Second additional owner's
number -> #
Account balance inquiry number -> #
1
1
*
*
1
1
*
*
2
2
*
*
3
3
*
*
4
4
*
*
Automatic
engine start
settings
By time
Set up time for automatic start
By voltage
Set up voltage for automatic start
1
1
*
*
2
2
*
*
3
3
*
*
4
4
*
*
By temperature
Set up temperature for automatic
start
5
5
*
*
6
6
*
*
By period
Set up period for automatic start
7
7
*
*
8
8
*
*
6
6
*
*
Sensor
sensitivity settings
Settings of the warning level of the
shock sensor sensitivity
Settings of the alarm level of the
shock sensor sensitivity
Settings of the motion sensor
sensitivity
1
1
*
*
2
2
*
*
3
3
*
*
4
4
*
*
Settings of the tilt sensor sensitivity
Settings of the warning level of the
supplementary sensor sensitivity
5
5
*
*
Settings of the alarm level of the
supplementary sensor sensitivity
6
6
*
*
7
7
*
*
Settings
of the voice calls
Voice calls on alarm
Voice calls on triggering warning
level of the sensors
Voice calls on engine start
Voice calls on engine stop
1
1
*
*
2
2
*
*
3
3
*
*
4
4
*
*
Voice calls on restoring GSM
connection
Voice calls on disarming
5
5
*
*
6
6
*
*
Voice calls on entering
programming mode
Voice calls when radio relay
connection is lost
7
7
*
*
8
8
*
*
Voice calls when on-board voltage
is low
9
9
*
*
Voice calls on accident
0
0
*
*
2
2
*
*
Settings
of the text messages
Text messages on alarm
Text messages on triggering warning
level of the sensors
Text messages on engine start
Text messages on engine stop
Text messages on restoring GSM
connection
Text messages on disarming
1
1
*
*
2
2
*
*
3
3
*
*
4
4
*
*
5
5
*
*
6
6
*
*
Text messages on entering
programming mode
Text messages when radio relay
connection is lost
7
7
*
*
8
8
*
*
Text messages when on-board
voltage is low
9
9
*
*
Text messages on accident
0
0
*
*
3
3
*
*
Immobilizer
settings
Immobilizer (on/off)
Antihijack
1
1
*
*
2
2
*
*
4
4
*
*
Additional
settings
Changing guest PIN-code
Entering as guest
Remote blocking
1
1
*
*
2
2
*
*
3
3
*
*
Set threshold voltage for sending
text message
5
5
*
*
5
5
*
*
Settings
of saving mode
GSM connection
Money saving mode of the GSM
connection
Voice calls in roaming service
1
1
*
*
2
2
*
*
3
3
*
*
8
8
*
*
Current time
and date settings
9
9
*
*
NOTE: Engine start via temperature is available
only if temperature sensor is connected. The sensor
availability depends on the system set.
