13
12
USER MANUAL
PANDORA DXL 1840L CAR SERVICE-SECURITY SYSTEM
Enabling/Disabling immobilizer radio tag
Write down or remember the ‘Service PIN-code’
To disable immobilizer radio tag, enter level 15 (the system should be in programming mode). Enter the
‘Secret PIN-code’ to disable radio tag or press VALET button once to enable radio tag.
Enter the “Service PIN-code” to enter programming mode (factory preset of the service PIN-code is ‘1-1-1-1’).
You can enter the code only if the base unit is powered, the ignition is switched off, the system is disarmed and
the maintenance mode is switched off. If there is no ‘Service PIN-code’, you can enter programming mode using
the ‘Secret PIN-code’ written on the owner’s card. After entering programming mode, press VALET button 15
times. Green color of LED indicator means a radio tag is switched on, red color means a radio tag is switched off.
Disabling radio tag:
LED indicator will light green after entering the programming level. The system will wait for en-
tering the ‘Secret PIN-code’. Enter the ‘Secret PIN-code’ that is written on the owner’s plastic card. The
system will confirm disabling of the radio tag with two sound signals of the siren and a long red LED
flash. After that the system will return to the programming menu. If the PIN-code is not entered within
10 seconds or the input is incorrect, a siren will sound one signal, LED will produce the series of red and
green flashes and the system will return to the programming menu.
Enabling radio tag:
LED indicator will light red after entering the programming level. The system will wait for action.
Press VALET button once to enable radio tag. The system will confirm enabling with one short sound
signal of a siren and a green LED light. After that the system will return to the programming menu.
Control over the system via a phone
Call the system’s phone number. When it answers, enter a command code.
DTMF – commands.
For example: To have simple access to engine start function, create a new contact in the contact
list of your phone, name it ‘Engine start’, for instance, and add the number in the following format:
+XXXXXXXXXXX,123*,297* where ‘+XXXXXXXXXXX’ – the system phone number,
‘,’ - pause is a feature of the phone (can be displayed as the ‘P’, see the instructions of the phone),
‘123*’ - remote engine start DTMF command,
#
#
9
9
*
*
*
*
9
9
0
0
*
*
1
1
0
0
0
0
*
*
1
1
2
2
3
3
*
*
Return to previous menu state
Repeat the last message
Silent arming
Help
0
0
0
0
*
*
0
0
1
1
*
*
Silent disarming
1
1
*
*
Arming
0
0
*
*
Disarming
Event history
5
5
1
1
*
*
Tow truck mode
Request GSM account balance
Start the engine/prolong heating
3
3
2
2
1
1
*
*
Stop the engine
3
3
3
3
3
3
*
*
Switch on add. function using F via CAN
5
5
0
0
0
0
*
*
4
4
5
5
6
6
*
*
6
6
5
5
4
4
*
*
6
6
6
6
6
6
*
*
9
9
9
9
9
9
*
*
2
2
5
5
8
8
*
*
System information
Request current coordinates
Switch on additional channel
Switch off additional channel
1
1
5
5
6
6
*
*
6
6
5
5
1
1
*
*
Switch on engine preheater
Switch off engine preheater
Enable engine blocking
Disable engine blocking
9
9
9
9
8
8
*
*
Disable immobilizer tag
8
8
8
8
8
8
*
*
Enable immobilizer tag
2
2
2
2
2
2
*
*
Disable Hands Free mode
2
2
2
2
3
3
*
*
Enable Hands Free arming
2
2
2
2
4
4
*
*
Enable Hands Free disarming
2
2
2
2
5
5
*
*
Enable Hands Free disarming only with autom. start
7
7
8
8
9
9
*
*
Enable automatic engine start
9
9
8
8
7
7
*
*
Disable automatic engine start
2
2
9
9
7
7
*
*
Call ended
5
5
5
5
1
1
*
*
Enable maintenance mode (see description below)
5
5
5
5
2
2
*
*
Disable maintenance mode
WARNING!
IT IS HIGHLY RECOMENDED TO CHANGE FACTORY PRESET OF THE “SERVICE PIN-
CODE” FOR IMPROVING SECURITY OF THE SYSTEM.
WARNING!
IF THE CALL IS NOT MADE FROM THE OWNER’S NUMBER, GUEST PIN-CODE
SHOULD BE ENTERED. FACTORY SET GUEST PIN CODE IS 1-2-3-4. AFTER THESYS-
TEM IS INSTALLED, PLEASE CHANGE FACTORY SET PIN-CODE. 1-2-3-4.
