13
12
User manual
Pandora DXL-1820L/1830L service-security system
‘297*’
– end call DTMF command.
Contact can be added as a speed dial to any of the free button. To have simple access to engine start
function a phone other than the main owner’s phone, create contact in the following format:
+XXXXXXXXXXX,1234,123*,297*
, where:
‘1234’
– guest PIN-code.
Enable/Disable maintenance/valet mode
1. Call system’s number. Wait for answer.
2. To enable maintenance/valet mode, dial ‘Enable maintenance/valet mode’ DTMF command
551*
(engine must be running, radio tag on the 2,4 GHz should be in range if immobilizer/Antihijack
mode is active).
3. Enter individual PIN-code that is located on the owner’s plastic card.
4. To disable maintenance/valet mode, dial
552*
DTMF command.
Voice help
The system has voice help menu. During voice call to the system, dial
9*
and listen to the
information about system control commands. To end session, hang up the phone.
Repeat the last message
To repeat any message, press
*
during a voice call to the system.
Arming/disarming
1. Call the system’s number. Wait for answer.
2. Dial
1*
to arm or
0*
to disarm.
For silent arming dial
10*
or
00*
for silent disarming.
3. The system will confirm: ‘Arming/Disarming’.
To end session, hang up the phone.
WARNING!
ONLY ENABLE REMOTE START IF YOUR LOCAL LEGISLATION ALLOWS DRIVERLESS
CARS TO HAVE WORKING ENGINE.
Enabling/disabling automatic engine start
Pandora system has function of promptly disabling automatic engine start.
1. Call the system’s number. Wait for answer.
2. Dial
987*
to disable all automatic engine starts or
789*
to enable all automatic engine starts.
3. The system will confirm execution.
To end session, hang up the phone.
Automatics starts can be enabled again by dialing
789*
(all previous settings will remain intact).
Locking/unlocking the engine
You can block car’s engine using any phone. The engine will remain blocked until phone command
‘Unlock engine’ will be sent. This blocking cannot be disabled using a remote.
1. Call the system’s number and wait for answer.
2. Dial
666*
to enable engine blocking or
999*
to disable engine blocking (after dialing, you will
need to enter individual PIN-code that is located on the owner’s plastic card).
Request current coordinates
1. Call the system’s number. Wait for answer.
2. Dial
500*
.
3. The system will confirm: ‘Current coordinate sent via text message’ and will send text message
with coordinates and a web link to a map to your phone.
To end session, hang up the phone.
Request GSM account balance
1. Call the system’s number. Wait for answer.
2. Dial
100*
.
3. The system will confirm: ‘Balance information sent via text message’ and will send text message
with account balance information to your phone.
To end session, hang up the phone.
