Pando CEE 2004/108/CE EMC Скачать руководство пользователя

Страница: 32 / 37

- 32 -

PROBLEMA

SOLUCION

The hood does not work...

• Check that the hood is connected to the power supply; look at the

plug and the differential circuit breaker in the fuse box.

• Carry out a reset: disconnect the differential circuit breaker for the

power supply to the hood in the house fuse box, wait 2 minutes then
switch it on again.

• Contact the official technical service.

The hood does not perform
properly... it does not suck
air up…

• Carry out a reset: disconnect the differential circuit breaker for the

power supply to the hood in the house fuse box, wait 2 minutes then
switch it on again.

• Check that the filters are properly maintained and clean or replace if

necessary.

•  Check that the outlet at the end of the flue is not obstructed.
•  Contact the distributor to make sure it is properly installed.
•  Contact the official technical service.

The hood stops while
working…

• Check that the timer function has not been set to switch it off.
• Make sure the hood is connected to the power supply; look at the plug

and the differential circuit breaker in the fuse box.

• Check that there are no problems with the electrical power supply,

such as spikes and drops in voltage.

The hood makes a lot of
noise…

• Carry out a reset: disconnect the differential circuit breaker for the

power supply to the hood in the house fuse box, wait 2 minutes then
switch it on again.

• Carry out a visual check that the outlet end of the flue is not obstructed

if this is possible and safe.

• Contact the distributor to make sure it is properly installed.
• Contact the official technical service.

La campana condensa…

• See recommendations in the event of condensation, page.33

The lights do not work….

• Carry out a reset: disconnect the differential circuit breaker for the

power supply to the hood in the house fuse box, wait 2 minutes then
switch it on again.

• Replace the bulb.
• Contact the official technical service.

The control panel does not
work……

• Carry out a reset: disconnect the differential circuit breaker for the

power supply to the hood in the house fuse box, wait 2 minutes then
switch it on again.

• Contact the official technical service.

7. TROUBLE-SHOOTING

Содержание CEE 2004/108/CE EMC






































Результаты поиска

Содержание CEE 2004/108/CE EMC

Отзывы:

Похожие инструкции для CEE 2004/108/CE EMC

Бренды по названию

Популярные бренды

Pando CEE 2004/108/CE EMC, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание CEE 2004/108/CE EMC

Отзывы:

Похожие инструкции для CEE 2004/108/CE EMC

Бренды по названию

Популярные бренды