manualshive.com logo in svg

Pando Atlona Omega AT-OME-ST31A, Руководство пользователя

Поделиться
Скачать
Pando Atlona Omega AT-OME-ST31A Скачать руководство пользователя страница 10

AT-OME-ST31A

10

Connection Instructions

1. 

Connect HDMI cables from HD/UHD sources to 

INPUT 2

 and 

INPUT 3

.

2. 

Connect a USB-C cable from a source to 

INPUT 1

 on the switcher.

3. 

Connect an Ethernet cable, from the 

HDBaseT

 port to a compatible HDBaseT receiver.

 

4. 

Connect an HDMI cable from the 

HDMI

 output port to a display or other sink device.

Installation

NOTE:  

The AT-OME-ST31A is powered by a receiver unit using PoE over HDBaseT.  If a PoE over 

HDBaseT receiver is not used, then the AT-OME-ST31A must be powered using the optional 24 V DC 

power supply* (not included).  When used with the external power supply, the AT-OME-ST31A can 

provide power to the connected USB-C device as well as a PoE over HDBaseT receiver. The power 

supply (part no. AT-PS-245-D4) can be purchased from Atlona.

NOTE:  

The HDMI and HDBaseT 

OUTPUT

 ports are mirrored, meaning that the same A/V signal is 

transmitted over both ports.

5. 

Connect an Ethernet cable from the 

LAN

 port to the Local Area Network.  This will allow access to the built-in 

web server, and provide remote control of the AT-OME-ST31A.

Cable

Max. Distance @ 4K 

Max. Distance @ 1080p

CAT5e

295 feet (90 meters)

330 feet (100 meters)

CAT6a / CAT6a / CAT7

330 feet (100 meters)

330 feet (100 meters)

IMPORTANT:  

Stranded or patch cable is not recommended due to performance issues.

 

Sheilded cables are strongly recommended to minimize signal noise and interference.

6.  OPTIONAL:  Connect an RS-232 cable from the control device to the 

RS-232

 port on the AT-OME-ST31A.  Refer 

to 

Solution Setup and Configuration Guide (page 35)

 for more information.

7. 

OPTIONAL:  Connect a 5-pin captive screw block to the AUDIO OUT port to provide audio de-embedding to an 

audio output device.

Core

Shielding

CAT5e

CAT6

CAT6a

CAT7

Solid

UTP (unshielded)

N/A

STP (sheilded)

Refer to the tables below for recommended cabling when using Altona products with HDBaseT technology.

 

The green bars indicate the signal quality when using each type of cable.  Higher-quality signals are represented 

by more bars.  

These tables are for guidance, only.  Performance may vary, based on environmental factors.

Содержание Atlona Omega AT-OME-ST31A























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды