manualshive.com logo in svg

Pando Atlona Omega AT-OME-ST31A, Руководство пользователя

Поделиться
Скачать
Pando Atlona Omega AT-OME-ST31A Скачать руководство пользователя страница 24

AT-OME-ST31A

24

After logging in, the 

Info

 page will be displayed.  The 

Info

 page provides various information about the receiver, 

including the model name, software version, and video information.

Configuration and Management Interfaces

Model Name

 

The model SKU of this product.

Software Version

 

The version of firmware that the AT-OME-ST31A is running.  Always make sure to check the AT-OME-ST31A product 

page, on the Atlona web site, for the latest version of firmware.

On-Time(d-h:m:s)

 

Displays how long the system has been powered since the last reboot/reset.

RxType

 

If a receiver is connected to the AT-OME-ST31A, then it will be displayed in this field.  Otherwise, "Unknown" will be 

displayed if no receiver is connected.

Active Input

 

The currently selected (active) input.

Signal Type

 

The type of input signal.

Video Format

 

The input resolution of the source device.

Aspect

 

Aspect ratio of the input signal.

Color Space

 

Displays the color space and chroma sub-sampling of the input signal.

Color Depth

 

The color depth of the input signal.

Info Page

Содержание Atlona Omega AT-OME-ST31A























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды