
AT-OME-ST31A
37
OUTPUT
DC 24V
INPUT
2
3
RS-232
AT-OME-ST31A
1
L
R
AUDIO OUT
LAN
IP MODE
RESET
INPUT
FW
3
2
1
PWR
LINK
OMEGA
TM
AT-OME-ST31A
DISPLAY
Display Control
Solution Setup and Configuration Guide
The AT-OME-ST31A provides both a
LAN
and
RS-232
port, which allows commands to be sent from the AT-OME-
ST31A to a connected display over a serial cable or over Ethernet. No external control system is required.
The
DISPLAY
button can be programmed to toggle power on the display, allowing for convenient control of the
display device from the location of the source.
to display
1.
Connect a serial cable from the
RS-232
port on the AT-OME-ST31A, to the RS-232 port on the display. The
included 3-pin captive screw connector should be wired as shown.
Using RS-232
2.
Launch a web browser.
3.
In the address bar, type the IP address of the AT-OME-ST31A.
4. The
Login
page will be displayed. Enter the required credentials. The default credentials are shown below:
Username:
admin
Password:
Atlona
5. Click the
Submit
button or press the [ENTER] key on the keyboard.
6.
Click
RS-232
in the menu bar. The
RS-232
page will be shown.
GND
RxD
TxD