User Manual For CYCLONE Programmers
68
$0061: Undefined header operation
$0062: Operation in algorithm header has failed.
16.4
SAP Operation Related Errors
$0080: SAP operation is not supported.
$0082: Target type mismatch
$0083: SAP operation cancelled
$0084: Running algorithm failure
16.5
SAP Blank Check Range and Module Related Errors
$1001: Blank Check is not supported by this algorithm.
$1002: Blank Check algorithm was not found.
$1003: Blank Check operation failed
16.6
SAP Erase Range and Module Related Errors
$2001: Erase error, algorithm not supported
$2002: Erase error, algorithm not found
$2003: Erase error, module failed or cancelled
$2004: Erase error, module failed, target is still secured
$2005: Erase error, module not performed, data is preserved
16.7
SAP Program Byte, Word, and Module Related Errors
$3001: Program error, algorithm not supported
$3002: Program error, algorithm not found
$3003: Program operation failed or was cancelled
$3004: Program operation failed, write protected
$3005: Program error, Data size exceeds the limit
$300A: Error during reading data range, invalid data length
$300B: Error during reading data range, invalid start address
$300C: Error during reading data range, no target power
$300D: Error during programming data range, invalid data length
$300E: Error during programming data range, invalid start address
$300F: Error during programming data range, no target power
$3010: Error reported while running the custom test application (RT) on the target.
$3011: Error displaying feature
$3012: Error programming feature
$3013: Error overlaying feature
$3014: Error: Run Test Operation terminated
$3015: Error: Run Test Operation over character limit 255
$3016: Error run test operation failed
$3017: Error: unable to allocated memory during run test.
$3040: Error: Program may cause the device to be secured permanently
