manualshive.com logo in svg

P&E Microcomputer Systems CYCLONE, Руководство пользователя

Поделиться
Скачать
P&E Microcomputer Systems CYCLONE Скачать руководство пользователя страница 75

User Manual For CYCLONE Programmers

70

$8015: Fatal Error: please contact PEmicro.
$8016: Fatal Error: please contact PEmicro.
$8017: Fatal Error: please contact PEmicro.
$8018: Fatal Error: please contact PEmicro.
$8019: Fatal Error: please contact PEmicro.
$801A: Fatal Error: please contact PEmicro.
$801B: Fatal Error: please contact PEmicro.
$8020: Fatal Error: please contact PEmicro.
$8021: Fatal Error: please contact PEmicro.
$8022: Fatal Error: please contact PEmicro.
$8023: Fatal Error: please contact PEmicro.
$8024: Fatal Error: please contact PEmicro.

16.13

Operation Security Related Errors

$9001: Error: Exceeds image specified Program Limit
$9002: Error: Exceeds image specified Error Limit
$9003: Error: Exceeds Image specified Date Range
$9004: This programming image has usage restrictions enabled. Requires Cyclone FX hardware.
$9005: Error: This programming image has barcode enabled. Requires Cyclone FX hardware.
$9006: Error: This programming image has command RT Run Code in Test/Calibration Mode. 

Requires Cyclone FX hardware.

$9007: Error: This programming image has command DF Display Feature Data. Requires Cyclone 

FX hardware.

$9008: Error: This programming image has command PF Program Feature Data to 

Address.Requires Cyclone FX hardware.

$9009: Error: This programming image has command OF Overlay Feature Data over File 

Data.Requires Cyclone FX hardware.

16.14

External Memory-Related Errors

$A001: Error writing to external memory card
$A002: Error formatting the external memory card
$A003: External memory card was disconnected during use
$A004: External memory card has unsupported format
$A005: External memory card has corrupted data
$A006: Faulty external memory card.
$A007: Failed during internal memory verification
$A008: Failed during external memory card verification
$A009: Error while reading external memory card for image pointer
$A00A: Error: Read-only lock is enabled in the external memory card.

16.15

Serial Number Related Errors

$B001: Error erasing the serial number storage
$B002: Error writing serial number
$B003: Serial number is over the limit, up to 255 can be supported at a time
$B004: Error loading Serial Number structure from reset

Содержание CYCLONE

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды