User Manual For CYCLONE Programmers
27
5.2.1
Select Programming Image
Displays a list of the available programming images so that the user may select one for
programming. Images in the
CYCLONE
internal memory are preceded by the designation
“IN”
and numbered sequentially, i.e.,
IN1:
first image name
,
IN2:
second image name
.
You may tap the appropriate image to select it. The image name shown is the one specified in the
Cyclone Configuration Utility when saving the image to the Cyclone.
5.2.2
Current Image Options
This menu presents options that allow the user to select or configure programming images on the
CYCLONE
.
5.2.2.1
Execute Image Function
Execute Specific SAP Function presents four Stand-Alone Programming functions that you may
execute by tapping the function that you wish to execute:
5.2.2.1.1 Launch Programming
This allows the user to execute the programming function. The
CYCLONE
will program the target
device, if able, using the currently selected programming image. This is functionally equivalent to
pressing the Start button.
5.2.2.1.2 Verify Data In Target
Performs a verify function on the data that has been programmed into the target device.
5.2.2.1.3 Toggle Power
Toggles the target power and makes sure all ports are driven to debug mode level.
5.2.2.1.4 Power Cycle Device To Run User Code
Toggles the target power and maintains tri-state mode for all signals.
5.2.2.1.5 Validate Image CRC32
Allows the user to perform a CRC32 validation on the currently selected programming image.
5.2.2.2
Set Image Validation
Allows the user to choose between two validation settings: 1) validate the image each time the
Start button is pressed, or 2) do not validate the image.
5.2.2.3
Modify Next Serial Number
Presents options that display the current serial number and allow the user to increase or decrease
the next serial number. Tap “Current Image ID Selected” to view/choose the desired programming
image; tap “Current Alg ID Selected” to view/choose the desired programming algorithm; use
“Current CS ID Selected” to view/choose the desired Choose Serial file. The adjustment buttons
will display “Increase Not Allowed” and “Decrease Not Allowed” if the image/algorithm/CS files that
the user has selected to do not allow for this operation.
5.2.3
Configure Cyclone Settings
Presents options that allow the user to choose to configure the
CYCLONE
network settings, time/
date settings, and LCD touchscreen display settings, or to set the display to dynamic.
5.2.3.1
Edit Cyclone Name
Allows the user to edit the name of the Cyclone using the on-screen keyboard. Click “Done” to
save the new Cyclone name or “Cancel” to exit without saving a new Cyclone name. This name
will be displayed on the
CYCLONE
home screen if the Cyclone is configured to do so.
