P&E Microcomputer Systems Cyclone LC Series страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 149

background image

Purchase Agreement

P&E Microcomputer Systems, Inc. reserves the right to make changes without further notice to any products herein to improve reliability, function, or
design. P&E Microcomputer Systems, Inc. does not assume any liability arising out of the application or use of any product or circuit described herein.
This software and accompanying documentation are protected by United States Copyright law and also by International Treaty provisions. Any use of this
software in violation of copyright law or the terms of this agreement will be prosecuted.
All the software described in this document is copyrighted by P&E Microcomputer Systems, Inc. Copyright notices have been included in the software.
P&E Microcomputer Systems authorizes you to make archival copies of the software and documentation for the sole purpose of back-up and protecting
your investment from loss. Under no circumstances may you copy this software or documentation for the purpose of distribution to others. Under no
conditions may you remove the copyright notices from this software or documentation.
This software may be used by one person on as many computers as that person uses, provided that the software is never used on two computers at the
same time. P&E expects that group programming projects making use of this software will purchase a copy of the software and documentation for each
user in the group. Contact P&E for volume discounts and site licensing agreements.
P&E Microcomputer Systems does not assume any liability for the use of this software beyond the original purchase price of the software. In no event will
P&E Microcomputer Systems be liable for additional damages, including any lost profits, lost savings or other incidental or consequential damages arising
out of the use or inability to use these programs, even if P&E Microcomputer Systems has been advised of the possibility of such damage.
By using this software, you accept the terms of this agreement.

©2015-2019 P&E Microcomputer Systems, Inc.
ARM and Cortex are registered trademarksof ARM Ltd. or its subsidiaries.
NXP, ColdFire, and Kinetis are registered trademarks of NXP Semiconductors.
Texas Instruments and TI are registered trademarks of Texas Instruments Incorporated.
STMicroelectronics is a registered trademark of STMicroelectronics, Inc.
All other product or service names are the property of their respective owners.

P&E Microcomputer Systems, Inc.
98 Galen St.
Watertown, MA 02472
617-923-0053
http://www.pemicro.com

Manual version: 1.17

July 2019

«
1
2
3
4
...
»

Содержание Cyclone LC Series






















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cyclone LC Series

Бренд: Gigabyte Страницы: 40

35891900 Series

Бренд: PC Partner Страницы: 16

Бренд: Gigabyte Страницы: 58

cpuModules CME34BT

Бренд: rtd Страницы: 110

Бренд: EVGA Страницы: 2

KEMX-1600 Series

Бренд: Quanmax Страницы: 74

Бренд: BCM Страницы: 93

Бренд: Gigabyte Страницы: 37

Бренд: MSI Страницы: 85

Бренд: ASROCK Страницы: 257

Бренд: Telit Wireless Solutions Страницы: 47

Бренд: Gigabyte Страницы: 31

Бренд: QDI Страницы: 47

Бренд: Richtek Страницы: 15

Бренд: ON Semiconductor Страницы: 7

Z87 Extreme9/ac

Бренд: ASROCK Страницы: 116

Бренд: Zeal-All Страницы: 9

Бренд: Texas Instruments Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды