Panasonic YF-0201Z5HGF, Руководство по эксплуатации, Страница: 9 / 38

Basic operation
9
4.
Basic operation
4.1
Names and functions
4.1.1
Operation panel
1)
Lamps and indicators
a.SCHEDULE lamp
Lights when the schedule (job No. setting) mode is
selected.
b.START lamp
Lights when the starting No. is selected in the schedule
mode.
c. Starting No. indicator
Shows the starting No. (1 to 4).
d.JOB lamp
Lights when the job No. is selected in the schedule or
sequence mode.
e.Job No. indicator
Shows the job (welding sequence) No. (1 to 9, A to F).
f. SOL lamp
Lights when the SOL No. is selected in the sequence
mode.
g.SOL No. indicator
Shows the SOL No. (
I
or
II
).
h.SEQUENCE lamp
Lights when the sequence mode is selected.
i. Data indicator A
Shows the data during operation (welding cycle,
conduction angle, welding count and trouble code) and
various data in the sequence and monitor modes.
j. Data indicator B
Shows the data during the operation (welding current,
product count and trouble code
(*)
), the mode during the
operation and various data in the sequence and monitor
modes.
k. MONITOR lamp
Lights when the monitor mode is selected.
l. FULL WAVE lamp
Lights when the welding current reaches the limit and
current larger than it cannot be carried.
m.WELD READY lamp
Lights when the machine enters operation mode while
the power to the controller and the welding machine are
on.
n.WELD POWER lamp
Lights when the power to the welding machine is turned
on.
(*)
: When the error code is 09s, the indicator displays the
last digit of the code. (For example, if the error code is
“09-1” the indicator displays “1”.)
a
b
c
d e f g
h
i
j
k
l
m
n