Panasonic YF-0201Z5HGF, Руководство по эксплуатации, Страница: 10 / 38

Basic operation
10
2)
Keys
1.SCHEDULE mode select key
Enables to set welding conditions
2.SEQUENCE mode select key
Enables to set sequence data
3.MONITOR mode select key
Enables to set monitor data
4.“-” key
Pressing this key decrements the number by the
minimum unit. Keeping pressing it changes the number
fast.
5.“+” key
Pressing this key increments the number by the
minimum unit. Keeping pressing it changes the number
fast.
6.ENTER/SHIFT key
Pressing this key stores the data and changes the
panel display to the next step. Keeping pressing it
changes the display fast.
When this key is pressed together with “TROUBLE
RESET” key, the data is stored while the panel display
returns to one step before.
7.TROUBLE RESET key
Use it reset the trouble state.
8.TEST key
Enables to test the welding sequence. The preset
sequence is executed when the start input is turned on,
however, the welding current does not flow.
“CH2” is displayed on the data indicator B.
9.ADJ key
Enables the adjustment. Only the pressing operation is
performed while the starting input is on.
Use this mode for electrode positioning and dressing.
“CH1” is displayed on the data indicator B.
10.WELD key
Enables to start the preset welding sequence. When
the start input is turned on, the welding sequence is
executed.
11.RUN key
Use it to switch to the operation mode. Press this key
for about one second to switches the mode to
“Operation” mode.
12.CONTROL POWER key
Turns ON/OFF the 100VAC input power of this product.
1
2
3
4
5
6
7
8
9
10
11
12