Panasonic YF-0201Z5HGF, Руководство по эксплуатации, Страница: 19 / 38

Basic operation
19
4.2.4
Monitor mode
Operation Lamp / indicator Indication
（ 1 ）
Selecting the monitor mode
• Press the MONITOR mode select key. .......... •MONITOR lamp:
ON
•CUR.LIMIT lamp: ON
•JOB lamp: ON
•Job No. indicator: Currently stored job number.
（
2
）
Selecting the job No.
• Select a number using “+” or “-” key............... Job No. indicator:
Selected number
• Press ENTER/SHIFT key............................... •JOB lamp:
OFF
•”%” lamp: ON
•Data indicator A: “U”
•Data indicator B: Currently stored current upper limit (%)
（ 3 ）
Setting the current upper limit (%)
• Select a number using “+” or “-” key............... Data indicator B:
Selected number
• Press ENTER/SHIFT key............................... •Data indicator A:
“L”
•Data indicator B: Currently stored current lower limit (%)
（ 4 ）
Setting the current lower limit (%)
• Select a number using “+” or “-” key............... Data indicator B:
Selected number
• Press ENTER/SHIFT key............................... •CUR.LIMIT lamp:
OFF
•Job No. indicator: OFF
•”%” lamp: OFF
•Data indicators A, B: OFF
•SOL lamp: ON
•SOL No. indicator: Currently stored SOL number
•WELD CNTR. lamp: ON
（ 5 ）
Selecting the SOL No.
• Select a number using “+” or “-” key............... SOL No. indicator:
Selected number
• Press ENTER/SHIFT key............................... •SOL lamp:
OFF
•”X1” (upper) lamp: ON
•Data indicator A: Currently stored welding counter set
value.
（
6
）
Setting the welding counter
• Select a number using “+” or “-” key............... Data indicator A:
Selected number
• Press ENTER/SHIFT key............................... •WELD CNTR. lamp:
OFF
•”X1” (upper) lamp: OFF
•Data indicator A: OFF
•PROD.CNTR. lamp: ON
•”X1” (lower) lamp: ON
•Data indicator B: Currently stored production counter set
value.