28
Confirming pairing
1
Remove the battery cover
Press on the portion labeled as on the bottom of
the battery cover and slide the cover in the
indicated direction to remove it.
2
Make sure the wireless receiver / extension receiver is turned ON
Make sure that the [POWER] indicator on the wireless receiver / extension receiver
lights green.
Power indicator
* This illustration shows the WX-SR202P.
3
Set the microphone to pairing confirmation mode
With the microphone powered on, press the [REG] button once to enter pairing
confirmation mode (the status indicator will turn green and orange alternately for five
seconds).
SENS L
/H
SET
REG
PTT OFF/ON
INP
UT LE
VEL ME
TER OFF/ON
N/A
1
2
3
4
SET
REG
T OFF/ON
INPUT LEVEL METER OFF/ON
* This illustration shows the WX-ST600P.
Status
indicator
Register button
SENS L/H
SET
REG
PTT OFF/ON
INPUT LEVEL METER OFF/ON
N/A
1
2
3
4
A
