19
Carefully read the “Precautions” section and follow all of its instructions.
Switch the power to OFF before inserting the batteries.
See “Replacing the batteries” (page 33) for instructions on changing the batteries.
memo
Important
●
Do not touch the battery poles with your hands. Doing so may cause
connection problems and noise. If the battery poles become dirty, clean
them with a dry, soft cloth.
SENS L
/H
SET
REG
PTT OFF/ON
INP
UT LE
VEL ME
TER OFF/ON
N/A
1
2
3
4
* This illustration shows the WX-ST600P.
Battery cover
Power switch
1
A
3
2
4
1
Confirm that the power switch is set to “OFF”.
2
Remove the battery cover
Press on the portion labeled as on the bottom of the battery cover and slide the
cover in the indicated direction to remove it.
3
Insert the batteries
Check the polarity of the batteries (positive and negative ), and insert either two
rechargeable Ni-MH AA-type batteries or two AA-type alkaline dry-cell batteries in the
battery slot according to the polarity indication ( , ).
4
Place the battery cover back on
Slide the battery cover in the indicated direction to place it back on.
Inserting the batteries
