background image

11

Other than the aforementioned 

“Precautions”

, make sure to follow the points below.

This product is intended for indoor use only

 

It cannot be used outdoors.

Avoid exposing the product to direct sunlight for extended periods of time, and do not 

install it near air conditioners or heaters. Failing to do so may lead to damage to the 

shape and color of the product, and may cause it to malfunction. Also avoid exposure to 

water droplets and bubbles.

Use this product with care

 

This product contains delicate components which may be damaged by improper use or 

storage.

 

Repair or replace any damaged components.

 

Subjecting the product to strong impacts, drops, etc. may alter its fine-tuning and change 

its characteristics. Please use it with care. Avoid impacting the product, as this will result 

in a strong impact sound noise.

 

Do not disassemble the product or touch its inner components.

The operating temperature range is

 

Between 5 °C (41 °F) and 35 °C (95 °F). Using the product outside of this range may 

cause it to malfunction or to be damaged.  

When calculating the usage time, consider that the batteries will last less than usual 

below 10 °C (50 °F).

Storage and usage locations

 

Avoid using the product where it could be affected by motors, transformers, or the 

ignition noise of cars.

 

Be especially careful when using the product in a high place. It may fall leading to 

malfunctions and injuries.

 

Do not use the product where there is a risk of damage from seawater or corrosive 

gases.

 

Do not use the product near TVs, radios, computers, and other office automation 

appliances. Doing so may cause the product to pick up noise.

 

Do not use the product near CS digital broadcasting receivers (tuners, digital TV sets 

with internal tuners, recorders, etc.). Doing so may cause the CS digital broadcast image 

to deteriorate.

 

Do not leave the product in hot places such as near heat-diffusing appliances (power 

amplifiers, video monitors, measuring instruments, etc.) or closed-off cars in the 

summer. When storing the product, keep it away from moisture as much as possible.

Usage precautions

Содержание WX-ST600P













































Отзывы: