41
English
Maintenance
[Maintenance]
This function is used to check the software version of the
Center Module or return the Center Module to the factory
settings.
w
w
Displaying the software version
Display the software version of this Center Module.
1
On the Settings screen, touch the
[Maintenance] button, and then the [Software
Version] button.
* DSP2 and BBIC2 are not displayed for single lane
operation.
w
w
Data initialization
This function is used to return the settings to the factory
settings. The data, including the registration information for
the All-In-One Headsets or Belt Packs and messages, is
initialized. The date and time settings are not initialized.
1
On the Settings screen, touch the
[Maintenance] button, and then the [Factory
Reset] button.
2
Touch the [Execute] button.
w
p
The following confirmation pop-up screen is
displayed. To perform initialization, touch the [OK]
button. To cancel initialization, touch the [Cancel]
button.
w
p
Touch the [OK] button to perform initialization.
w
p
After initialization is complete, the system restarts
automatically.
w
p
The date and time settings are not initialized.
Note
