17
English
Setting the Center Module
w
p
You can register up to 32 All-In-One Headsets or Belt
Packs in a group.
w
p
You can register an All-In-One Headset or Belt Pack
in multiple groups.
Note
4
Touch the [Set] button.
w
p
Registration of the All-In-One Headsets or Belt Packs
is entered.
w
w
Setting the Wireless Repeater
[Wireless Repeater]
This function is used to register or delete wireless repeaters.
How to register an ID
Register wireless repeaters. You can extend the wireless
communication distance by using wireless repeaters.
w
p
To use a wireless repeater, its ID must be registered.
w
p
For ID registration, set the Center Module to wireless
repeater ID registration mode, and register the ID by
operating the repeater.
The ID registration procedure for the wireless repeater is
described below.
1
On the Settings screen, touch the [Wireless
Repeater] button, ([Lane A/B] button,)* and
then the [ID Registration] button.
* This appears only when the WX-CC412A is used.
w
p
If the wireless repeater has been registered, you
will not be able to touch the [ID Registration] button.
Cancel registration of the wireless repeater, and then
perform ID registration again.
Note
2
Touch the [Start] button.
w
p
The following confirmation pop-up screen is
displayed. You cannot perform other operations
during ID registration. To continue ID registration,
touch the [YES] button. To stop ID registration, touch
the [NO] button.
w
p
Touch the [YES] button to start Wireless repeater ID
registration mode.
