![background image](http://html2.mh-extra.com/html/panasonic/wvnp1000-network-camera/wvnp1000-network-camera_operating-instructions-manual_3854926038.webp)
38
Configure the settings relating to the FTP server [FTP]
Click the [FTP] tab on the "Server setup" page. (
☞
page 37)
The settings relating to the FTP server used to transmit the alarm images can be configured on this page.
[FTP server address]
Enter the IP address or the host name of the FTP serv-
er.
Number of characters for the FTP server address:
1 - 128 characters
Important:
When entering the host name for "FTP server
address", it is necessary to configure the DNS set-
tings on the [Network] tab of the "Network setup"
page. (
☞
page 39)
[User name]
Enter the user name (login name) to access the FTP
server.
Number of characters for the user name:
1 - 32 char-
acters
[Password]
Enter the password to access the FTP server.
Number of characters for the password:
0 - 32 char-
acters
[Control port]
Enter a control port number to be used for the FTP serv-
er.
Available port number:
1 - 65535
Default:
21
[FTP mode]
Select "Passive" or "Active" for the FTP mode.
Normally, select "Passive". When failed to establish the
connection, select "Active".
Default:
Passive