6
PRECAUTIONS
• Refer all work related to the installation of this
product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
Place the appliance at least 5 cm (2 inches) away from
the wall to prevent the appliance from heating up.
• Do not drop metallic parts through the slots as this
could permanently damage the appliance.
Turn the power off immediately and refer servicing to
qualified service personnel if any foreign parts fall
through the slots.
• Do not attempt to disassemble the appliance.
Do not remove any screws or covers as doing so can
cause electric shocks.
There are not any user-serviceable parts inside. Refer
maintenance to qualified service personnel.
• Handle the appliance with care.
Do not strike or shake the appliance as this may dam-
age the appliance.
• Do not expose the appliance to water or moisture.
Do not try to operate it in wet areas.
Take immediate action if the appliance becomes wet.
Turn the power off and refer servicing to qualified ser-
vice personnel. Moisture can damage the appliance
and can also cause electric shocks.
• Do not use strong or abrasive detergents to clean
the outside of the appliance.
Use a dry cloth to clean the appliance when it is dirty. If
the dirt is hard to remove, then use a mild detergent
and wipe gently.
• Do not operate the appliance beyond its specified
temperature, humidity or power source ratings.
Do not use the appliance in an extreme environment
where there are high temperatures or high humidity.
Use the appliance at temperatures within –10˚C and
+50˚C (14°F to 122°F) and where the humidity below 90
%.
The input power source for this appliance is 120 V AC
60 Hz.
